Precise cutting at walls is essential for a professional finish. Measure the distance from the edge of the installed board to the wall, then subtract the manufacturer-recommended expansion gap width. For irregular walls, use a contour gauge to copy the profile onto the wood plank. Once marked, use a jigsaw or miter saw to cut along the line. Always double-check your measurements before cutting, as wood planks are difficult to replace once cut too short for the gap requirement.
Ask an ExpertHardwood
How to cut wood planks for wall-to-wall transitions?
To cut wood planks for wall-to-wall transitions, measure the distance from the last full row to the wall, accounting for the required expansion gap. Use a miter saw or table saw for straight cuts, and employ a contour gauge or cardboard template to scribe irregular wall shapes.